From residential complexes to factories

Electrical Works Division

We design, install, test and hand over the building's electrical network ready to run: from the substation and generator to the last socket in the room. A team of engineers and technicians working on residential, commercial and industrial projects across Iraq.

The sectors we work in

Every building has its own loads and needs. Choose your type of project to see what we deliver.

Residential complexes

A complete network for the complex: from the substation to every building and every flat, with shared services.

  • Substations and underground cables feeding the buildings
  • Main and sub boards for every building and flat, with a meter per unit
  • The complex generator linked through an automatic changeover when the grid drops
  • Street, garden and car-park lighting
  • Earthing and lightning protection for the towers

We calculate the loads for the whole complex from the start, so the network has room for later phases without rewiring.

Homes and villas

Wiring a new home, or safely renewing an old one, with loads sized for air conditioning and the kitchen.

  • Complete wiring for lighting, sockets and appliances
  • A distribution board with breakers and earth-leakage protection
  • Grid and private generator joined through a switch that keeps them apart
  • Indoor, garden and façade lighting
  • Conduits ready for cameras, internet and smart-home systems

We test the old wiring before renewing it, and tell you what must be replaced and what can stay.

Hotels

A hotel where the lights stay on and the lifts keep running, with guest comfort and lower consumption.

  • Key-card room power to save energy
  • Lobby, corridor and façade lighting with lighting scenes
  • Backup power for lifts, pumps and emergency lighting
  • Separate boards for kitchen, laundry and central air conditioning
  • Integration with fire and building management systems

Factories and warehouses

Reliable power for production lines, with organised wiring that is easy to maintain and extend.

  • Transformers, main and sub power boards
  • Cable trays and organised routes above the production lines
  • Motor and machine control panels
  • Power-factor correction to cut losses and penalties
  • Industrial lighting for warehouses and high ceilings

When needed we work in phases, so production does not stop.

Offices and malls

Organised distribution for every floor and shop, with separated loads and consumption per tenant.

  • Distribution boards for every floor and shop
  • Separate meters for tenants
  • Energy-saving LED lighting with zone control
  • UPS power for server rooms
  • Separate routes for network and low-current cables

Hospitals and public buildings

Critical loads cannot take an interruption, so every important device gets more than one source.

  • Generators and automatic changeovers for critical loads
  • UPS for operating theatres, medical equipment and servers
  • Emergency lighting and exit signs
  • Separate boards for sensitive departments
  • Documented periodic maintenance and testing

What we deliver

Everything the building's electrical network needs, from one contractor.

  • Distribution boards

    Main and sub boards with breakers and protection chosen for the loads.

  • Cables and wiring

    Cables, conduits, trays and labelled, organised routes.

  • Lighting

    Indoor, outdoor, industrial and emergency lighting.

  • Generators and changeovers

    Grid and generator joined through a switch that protects equipment.

  • Earthing and lightning protection

    Protection for people and equipment, with measured earth resistance.

  • Power-factor correction

    Capacitor banks that cut losses in factories and large buildings.

  • Uninterruptible power

    UPS units for servers and sensitive loads.

  • Testing and commissioning

    Insulation, continuity and load tests before hand-over.

  • Maintenance and call-outs

    Periodic maintenance contracts and fault repair when it happens.

How we deliver a project

From the first visit to a building that runs safely.

  1. Site survey

    We visit the site and learn the building, its loads and the available sources.

  2. Design and load study

    Electrical drawings, load schedules, cable sizing and a bill of quantities.

  3. Materials

    Materials from reliable sources, to specifications agreed with you first.

  4. Installation and supervision

    Installation crews supervised by an engineer, with progress reports.

  5. Testing and hand-over

    Testing, commissioning, as-built drawings and operating training.

Safety and quality

Electricity leaves no room for guesswork, so we document every step.

  • Tested with instruments

    Insulation, earthing and loads measured before any board is switched on.

  • As-built drawings

    You receive drawings of the building as actually installed, for easy maintenance later.

  • Labelled installation

    Every breaker and every cable labelled, so you know where each line goes.

  • Standard specifications

    Work to approved standard specifications and safety instructions.

With EJAD's other divisions

Power is the base of every other system, so we prepare them together from the start.

Planning a residential, commercial or industrial project?

Book a site survey. We visit the project, estimate the loads and send you a detailed offer with quantities and timeline.

Communications and Media Commission (CMC)

EJAD Solutions license

EJAD Solutions holds a license from Iraq's Communications and Media Commission for two-way radio equipment. You can view the original license.

License no.
CMC BAG GPS 2600015
Issued
28/10/2026
Valid until
27/10/2028

Original PDF, 3.1 MB